Multiheat supplies innovative heating
solutions for your Poultry and Pig farm

More than 1000 projects realized in more than 45 countries.

Our heating solutions in livestock and industry

The goal of our different products, is to improve animal welfare and as a result, to improve the benefits for the farmer.
With our hot water heating systems for example, we create the perfect climate for the birds without adding any CO2 or humidity. Because of this, no ventilation is needed in the first few days. Also later in the flock, ventilation rates are much lower compared to traditional heating systems, which results in an energy saving of over 25-30%!

And because there is much more oxygen available for the birds, they are much more active and their feed conversion rate (FCR) improves significantly. And since the produced heat is free of humid (warm dry air), the litter quality is much dryer which result in a huge reduction in the feet problems, and as a result, antibiotics.
Other proved advantage is the reduction of Ammonia of 65% !!!!

Our heating solutions

Multiheat hot water units agriculture
Multiheat hot water units agriculture

Multiheat hot water units for heating of poultry buildings to obtain the best results in poultry buildings an optimum climatic environment is essential for the health and productivity of the birds. Temperature, humidity and CO2 are the main factors influencing these results. Therefore a perfect heating- and ventilation system is necessary.
Here the Multiheat HW unit is the solution!.

Download product leaflet
Ground Heat Superior
Ground Heat Superior

The Ground Heat Superior makes efficient use of ground source heat, saves energy and optimise the poultry house climate.

Saving energy and optimising the climate inside a poultry house are top priorities for every poultry farmer. The Ground Heat Superior heater by Multiheat is a top-quality, efficient and powerful solution.

Download product leaflet
Hog Heat Superior
Hog Heat Superior

The compact solution for a healthy climate, saves energy and optimise the hog house climate.

Saving energy and optimising the climate inside a hog house are top priorities for every pig farmer. The Hog Heat Superior heater by Multiheat is a top-quality, compact and powerful solution.

Download product leaflet
Snooksuperior indirect fired gas heater
Snooksuperior indirect fired gas heater

The SnookSuperior is a reinvention of the existing S’nook and takes indirect fired gas heating to the next level. Using the latest fabrication technologies, the body of the unit is made of stainless steel and all electronic parts are protected inside an IP55 plastic unit.
The SnookSuperior is our latest invention and helps you create the perfect climate, compared to its predecessor it’s improved on more than numerous points, such as:

Download product leaflet
Climate Station 185plus+
Climate Station 185plus+

The unit is installed outside, thus no obstacles in the way when cleaning the housing system and no combustion in the barn. Any maintenance work is performed outside the housing system, which means it is always peaceful inside. An ideal climate station for poultry housing systems, but also for other buildings, such as warehouses, exhibition halls, sports halls, etc.

Download product leaflet
Multiheat hot water industrial
Multiheat hot water industrial

Multiheat HW unit a unique air distribution unit!
The Multiheat HW unit consists of a high efficiency heat exchanger, axial fan and a unique designed distribution device. Hot water is supplied from an external boiler and passes the heat exchanger. The fan sucks the air from inside the building through the heat exchanger and pushes the warm air equally through the 6 air outlets. The amount of air and the directions can be adjusted by the flaps inside each air outlet. The units are hanging in the middle of the building whereby an ideal distribution is guaranteed to all corners in the building. The air can be distributed up to 6 m, subsequently for 12 m wide houses.

Download product leaflet

The features and benefits

Multiheat hot water unit
Multiheat hot water unit
Multiheat Hot Water unit consists of of a high efficiency heat exchanger, axial fan and a unique designed distribution device. Hot water is supplied from an external boiler and passes the heat exchanger radiator). The fan sucks the air from inside the building through the radiator and pushes the warm air equally through the 6 air outlets in a horizontal flow over the birds. The amount of air and the directions can be adjusted by the flaps inside each air outlet.
Multiheat hot water line unit
Multiheat hot water line unit
The Multiheat Hot Water Line heater unit is a straight blowing heater which has been developed for example for chick-rearing and layer houses. Thanks to the long cylinder duct, an air stream with a throw length of up to 50 meters is achieved dependent on the type. The outlet duct is fitted with our unique four outflow-guiding plates. The heated air is blown forcefully in a single direction as one stream. The radiator is fed by the central boiler.
Multiheat hot water unit industrial
Multiheat hot water unit industrial
The All purpose heater. Multiheat HW unit a unique air distribution unit. The Multiheat HW unit consists of a high efficiency heat exchanger, axial fan and a unique designed distribution device. Hot water is supplied from an external boiler and passes the heat exchanger. The fan sucks the air from inside the building through the heat exchanger and pushes the warm air equally through the 6 air outlets. The amount of air and the directions can be adjusted by the flaps inside each air outlet.
Multiheat hot water unit (USA/CANADA)
Multiheat hot water unit (USA/CANADA)
The body of the unit is made of durable ABS high heat resistance material. The 6 air outlets are designed in such a way that air is optimal distributed and built-in stainless steel flaps can be adjusted to influence the throw or to even close one outlet. The air can be distributed up to 50 ft, subsequently for 100 ft wide houses.

Get personal advise from our experts

Choosing the right heater or exchanger is not an easy job. You need to know the right capacity based on the available water temperature, insulation value, size of the building, target temperature in the building etc.

Want to know more?
Speak to one of our specialists!