Multiheat AC (Air Circulation) unit ensures ideal air distribution.
The Multiheat AC unit is a so-called pipe fan.
It is a round plastic pipe with the air distribution unit underneath,
with the unique well none six air outlets and a integrated fan.
It is an air distribution concept developed for the Multiheat HW heater, proven to achieve optimal air distribution in the barn or hall.
Multiheat recirculation unit a unique air distribution unit. The Multiheat recirculation unit consists, axial fan and a unique designed distribution device with an air intake pipe. The fan sucks the air form the top of the building through the pipe and pushes the warm equally through the 6 air outlets. The amount of air and the directions can be adjusted by the unique flaps inside the unit and the RPM of the fan. This create a perfect distribution. The air can be distributed up to 15m. subsequently for 30m. wide houses
Download product leaflet
Multiheat Hot Water unit consists of of a high efficiency heat exchanger, axial fan and a unique designed distribution device. Hot water is supplied from an external boiler and passes the heat exchanger radiator). The fan sucks the air from inside the building through the radiator and pushes the warm air equally through the 6 air outlets in a horizontal flow over the birds. The amount of air and the directions can be adjusted by the flaps inside each air outlet.
The Multiheat Hot Water Line heater unit is a straight blowing heater which has been developed for example for chick-rearing and layer houses.
Thanks to the long cylinder duct, an air stream with a throw length of up to 50 meters is achieved dependent on the type. The outlet duct is fitted with our unique four outflow-guiding plates. The heated air is blown forcefully in a single direction as one stream. The radiator is fed by the central boiler.
The All purpose heater Multiheat HW unit with unique air distribution unit. The Multiheat HW unit consists of a high efficiency heat exchanger, axial fan and a unique designed distribution device. Hot water is supplied from an external boiler and passes the heat exchanger. The fan sucks the air from inside the building through the heat exchanger and pushes the warm air equally through the 6 air outlets. The amount of air and the directions can be adjusted by the flaps inside each air outlet.
The body of the unit is made of durable ABS high heat resistance material. The 6 air outlets are designed in such a way that air is optimal distributed and built-in stainless steel flaps can be adjusted to influence the throw or to even close one outlet. The air can be distributed up to 50 ft, subsequently for 100 ft wide houses.
Choosing the right heater or exchanger is not an easy job. You need to know the right capacity based on the available water temperature, insulation value, size of the building, target temperature in the building etc.
