Differents models are available, please ask our advice.
Either stand alone or in combination with Multiheaters!
Three step heat exchange technology with dry filter cleaning, high efficiency heat-recovery unit and centrifugal fans to create the best result. Cross flow recuperator from easy to clean durable coated aluminum material.
Optimum climate inside the barn. To realize a healthy climate for poultry the ventilation part is of high importance. But, especially during cold weather circumstances, the heat loss with ventilation is high as well. To complete the heat requirement the heat recovery system is the solution.
With increasing and relatively high energy prices the moment has come to invest in a heat recovery system. Depending on the heat requirement and the outside temperature the pay-back period of such installation will be between 4 and 6 years. Each situation is different, but more and more the poultry farmer is searching for alternatives to reduce costs either with solar panels, windmills or heat recovery.
Download product leaflet
The Switch Superior is a compact, plug & play heat exchanger creating a healthy climate in the poultry farm.
Saving energy and optimising the climate inside a poultry house are top priorities for every poultry farmer. Temperature and ventilation play a big part in the ideal circumstances for poultry to perform. The Switch Superior Compact Heat Exchanger takes polluted, CO-2-rich air from the poultry house, and exchanges this for fresh, O2-rich air. The built-in exchanger block takes heat from the outgoing air to warm the fresh incoming air, which substanially improves the poultry house climate.
Download product leaflet
Multiheat Hot Water unit consists of of a high efficiency heat exchanger, axial fan and a unique designed distribution device. Hot water is supplied from an external boiler and passes the heat exchanger radiator). The fan sucks the air from inside the building through the radiator and pushes the warm air equally through the 6 air outlets in a horizontal flow over the birds. The amount of air and the directions can be adjusted by the flaps inside each air outlet.
The Multiheat Hot Water Line heater unit is a straight blowing heater which has been developed for example for chick-rearing and layer houses.
Thanks to the long cylinder duct, an air stream with a throw length of up to 50 meters is achieved dependent on the type. The outlet duct is fitted with our unique four outflow-guiding plates. The heated air is blown forcefully in a single direction as one stream. The radiator is fed by the central boiler.
The All purpose heater Multiheat HW unit with unique air distribution unit. The Multiheat HW unit consists of a high efficiency heat exchanger, axial fan and a unique designed distribution device. Hot water is supplied from an external boiler and passes the heat exchanger. The fan sucks the air from inside the building through the heat exchanger and pushes the warm air equally through the 6 air outlets. The amount of air and the directions can be adjusted by the flaps inside each air outlet.
The body of the unit is made of durable ABS high heat resistance material. The 6 air outlets are designed in such a way that air is optimal distributed and built-in stainless steel flaps can be adjusted to influence the throw or to even close one outlet. The air can be distributed up to 50 ft, subsequently for 100 ft wide houses.
Choosing the right heater or exchanger is not an easy job. You need to know the right capacity based on the available water temperature, insulation value, size of the building, target temperature in the building etc.
